Bioflexi" is an extremely flexible high-density fiberboard made of renewable raw materials.

 

The material can be used for the production of free-form furniture and partitions as well as flooring with anti-slip and impact-absorbing properties.

The high-density, bio-based fiberboard is absolutely flexible in shape. (Photos: Dahy, Stuttgart University)

The high-density, bio-based fiberboard is absolutely flexible in shape. (Photos: Dahy, Stuttgart University)

Sustainability is also a major issue in the furniture industry. Fiberboards have so far been used primarily in the furniture or interior design sector. However, they are often produced with resins that are less environmentally friendly. In addition, the range of design options is quite limited due to the poor flexibility.

Junior Professor Dr. Hanaa Dahy, Head of the Institute for Structural Engineering and Design (ITKE) at Stuttgart University, has developed a new, completely flexible fiberboard that is manufactured from rapidly renewable raw materials. These so-called biocomposites could be an alternative to plastics or HDF boards, as they are not produced with resins that are harmful to health.

The invention is protected by patent and was recently registered as a trademark under the name "Bioflexi". Due to the low raw material costs involved, "Bioflexi" is an attractive solution for the furniture industry and for architectural free-form applications.

The novel high-density fiberboard can be used for the production of free-form furniture and partitions as well as of floor coverings with anti-slip and impact-absorbing properties. The boards are produced based on established straw compounding methods. Depending on the application, the semi-finished product is pressed and then fixed in the desired shape by cover layers.

Conventional fiberboards are made from wood, sawmill by-products or residual wood. A distinction is made between the various boards based on their specific manufacturing process and density. However, a resin containing formaldehyde or isocyanates is often used for the production of the boards. Both substances pose considerable health risks. Therefore, many of the common fiberboards can be recycled but are not compostable.

The HDF board developed by Prof. Hanaa Dahy contains 80 to 90 percent annually renewable raw materials such as straw. This natural fiber is available worldwide as a residual material and therefore costs little. Moreover, straw does not compete with food production. The fiberboards can be made of wheat, maize, rice, oat, barley or rye straw fibers. Fiberboards made of rice straw have even an added benefit, i.e. their silicate concentration reach up to 20 % of the dry fiber weight. Since silicate is a natural fire-retardant material, the DIN 4102-B1 material classification "hardly inflammable" is thus already fulfilled by the addition of purely mineral additives.

An environmentally compatible thermoplastic elastomer is used as a binder. As a result, the board can be produced virtually free of formaldehyde and isocyanates, which minimizes health risks throughout the fiberboard's product life cycle. By adding different binding agents, both flexibility and stability of the boards can be varied for different applications. The boards can also be laminated with various waterproof coatings. Coloring could be achieved by a colored lamination.

At the end of its useful life, the fiberboard can be recycled and even composted. This leads to double waste prevention: Firstly, during production through the use of residual agricultural fibers, and secondly, through composting at the end of the product life cycle.

Patents have been granted for the flexible HDF board in the United States (US 10,137,596 B2) and Europe (EP 2965882 B1) (validated in DE, FR, GB & NL). Patent applications were also filed in Malaysia. Technologie-Lizenz-Büro (TLB) GmbH has been commissioned by Stuttgart University with the commercial implementation of the invention and is looking for industrial partners for the market launch. TLB GmbH offers companies the opportunity to license the patented technology or to purchase the industrial property rights.

For more detailed information, please contact Anne Böse, Business Development Manager at boese@tlb.de.